
| HOME | SUZUKI | TOYOTA | JEEP | NEW PRODUCTS | CONTACT US |
|
New Products & On Sale Items |
|
|
Rock Defense™ Front Frame Reinforcement Kit
|
|
|
Even the strongest frames need reinforcing when rock crawling and rock racing are your hobbies, that is why Trail Gear is now offering our Rock Defense Front Frame Support Kits for 79-85 Trucks, and 86-95 ˝ trucks and 4runners. These Rock Defense™ Front Frame Reinforcement Kits are precision laser cut from 3/16” thick steel and can easily be welded onto the outside of each side of the frame to provide extra strength to a frame that has been torched, welded, and hammered on over and over. Each kit includes two frame plates, one for each side. Kit is shipped unpainted and lightly oiled. Available Options:
|
LED Turn Signal Kit
|
|
|
LED turn signal kit for off road front bumpers. For ease of installation, and a variety of applications, we are offering this kit in both weld on and bolt on form. These 12V LED lights are 100% water proof, sealed with epoxy, and meet SAE Standard J2042-2003. The lens cover is amber in color, 2 1/2” x 1”, and is manufactured out of polycarbonate plastic which makes the lens much more impact resistant than other lenses made out of the more common acrylic plastic. The brackets are precision laser cut from 1/8” steel, shipped unpainted, and the weld on bracket is 3 1/4” tall so you have a sufficient amount of material to cut, cope, and weld this bracket in any way you want too. All hardware is included. Bolt-on kit fits 1 3/4" tubing only. Clamps for 1 1/2" tubing coming soon. Note: Since LED’s draw less amps than OEM turn signals your blinker relay will blink faster because it cannot read the low amps draw from the LED turn signals. Bolt-On Kit Includes:
Weld-On Kit Includes:
Available Options:
|
Rock Defense™ Low Profile Front Bumpers
|
|
|
HREW bumpers are strong, 1020 DOM bumpers are stronger, but Trail-Gear
had to take things to the next level, now all of our bumpers are 1035
DOM material (1.75" X .120" wall).
1035 DOM tubing is more dent resistant than 1020 DOM, and it will not split down the seam as we have all seen the cheaper HREW tubing do. We can confidently say that our Rock Defense™ bumpers are, by far, the strongest on the market. Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches. For larger winches some minor trimming of the grill may be required. Bumper also features a 2 inch receiver that will make a great anchor point for winch or strap recoveries. Note: Turn signal mounting tabs are not included. Unpainted steel finish. Will not work with roller type fairlead, requires hawse type fairlead. Not intended for use with a body lift. Shipping on all front bumpers to the continental US is $64. |
| Pickup | 1984-1985 | Model #1 (120187-1-K) | $299 |
| Pickup | 1986-1988 | Model #2 (120188-1-K) | $299
|
| Pickup | 1989-1995 | Model #3 (120189-1-K) | $299 |
| 4Runner | 1984-1985 | Model #1 (120187-1-K) | $299 |
| 4Runner | 1986-1989 | Model #2 (120188-1-K) | $299 |
| 4Runner | 1990-1995 | Model #4 (120190-1-K) | $299 |
| Tacoma | 1995-2004 | Taco #1 (120191-1-K) | $349 |
|
|
|
Heavy Duty Front Leaf Springs |
|
|
Front 3”, 4”, and 5” springs are now available in a heavy-duty version with a 25% higher spring rate. The HD leaf springs are great for heavier trucks and 4Runners with full bodies and exo-cages, V6 Toyota and Tacoma applications, and also works great for V6 and V8 engine swaps. The length is the same as our super flex spring, but with a higher spring rate the spring will hold its arch and lift longer. |
|
Kit Includes:
Available in the following sizes:
|
Rock Defense™ Tube Doors
|
|
Rock Defense™ Tube Doors, 120132-1-K, $199
|
4340 Chromoly Rear Tacoma Axle Shafts
|
|
|
When you add larger tires to your 95 1/2 - 04 Tacoma you increase the risk of twisting or breaking a rear axle shaft, that is why Trail-Gear has made a forged 4340 chromoly rear axle shaft with a breaking strength of 8,300 ft-lbs of torque and up to 120 degrees of twist. We are so confident that you will never break one of our shafts that we gave it our industry famous No Questions Asked Lifetime Warranty. Note: These shafts are for non-ABS axles only and are sold in pairs
|
|
4340 Chromoly Rear Tacoma Axle Shafts, $199 141042-1-K
|
FJ Cruiser Transfer Case Skid Plate
|
|
|
Serious off-road protection for your transfer case and exhaust. Heavy duty design takes impacts and directs the force up to the frame, away from expensive drive train components. Skid plate is made from 3/16" plate steel and attaches to the frame via 1.5" .120 tubing. Bolt on installation utilizing existing threaded mounting points on the frame. Protects both the transfer case and the exhaust crossover tube. Powdercoated gloss black finish, ready to install. Kit includes mounting hardware and instructions. Please note that small rub marks and scratches can result during shipping and handling. Fits 2007-2009 4wd FJ Cruiser.
|
|
Transfer Case Skid Plate, FJ Cruiser, $150 120065-1-K
|
Dirty 30 Birfield
|
|
|
With larger tires and more horse power than ever before being used on the trails these days, upgrades for your rig are more critical than ever. In a Toyota, one of the common failures are your stock 27 spline birfields. That is why we have developed our new 30 spline chromoly birfields, the Dirty 30's™. This birfield will get you to where you need to go and give you confidence and peace of mind while you are getting there.
|
|
Dirty 30 Birfield, $150 each, 140229-1
|
Rock Recovery™ Winch Line
|
|
|
|
Samurai 26 Spline Spool Locker
|
|
|
Mini Spools fit 86-95 Suzuki Samurai and 89-00 Sidekick rear applications and can also be installed into a front differential with the 26 spline spider gear upgrade. The TG mini spool installs into a standard 26 spline rear open carrier with no additional parts required and offers you the same traction as a full spool at a fraction of the cost.
|
|
Samurai 26 Spline Spool Locker,
141043-3, $75 |
Weld-On Differential Armor - Large
|
|
|
Armor welds in place. Includes two 10mm style drain plugs. Fits front or rear 79-95 8" Toyota solid axle housings. Unpainted finish.
|
|
Diff Armor, Large, $25 |
Aluminum Wheel Spacers
|
|
|
These bolt-on wheel spacers are designed to give you a little more width without changing out your axle for a wider one. Features safety graded studs and matching nuts for proper fit. Spacers are 1.25" and 1.5" thick. Made from Billet 6061-T6 aluminum. Grade 8 Studs, Grade 10.9 nuts. Only high quality nuts and studs that are hardness graded and stamped are used. Spacers feature precision machined surfaces for proper fit and contact with wheels and hubs
|
|
|
Mud Claw Radial MT |
|
|
local pick up only mounting/balancing available |
|
31 X 10.50 X 15" $132.49 each 32 X 11.50 X 15" $142.10 each 33 X 12.50 X 15" $155.66 each |
|
BF Goodrich Mud Terrain KM2 |
|
|
Krawler inspired tread design KM2 truck tires are the newest addition to the BFGoodrich family of truck tires. In this case, BFGoodrich expands upon the original KM design, further bolstering these truck tires for toughness and drivability in a variety of off road terrains.
local pick up only mounting/balancing available
|
|
31 X 10.50 X 15" $171.07 each 32 X 11.50 X 15" $191.10 each 33 X 12.50 X 15" $179.66 each 35 X 12.50 X 15" $201.71 each
|
|
|
|
|